#stm32

warecache Sensor Bins Count: Sensor-equipped bins weigh their own contents and report over MQTT, so the parts count stays honest. Inside the STM32H723 hardware behind warecache.

Tiwaz STM32 Split Keyboard: Timo Strube's Tiwaz splits into two standalone macro pads with joysticks, runs QMK on an STM32F401, and ships every hardware file open source.

Arduino's VENTUNO Q pairs an 8-core Dragonwing with an STM32, 16GB of LPDDR5 and a 40 TOPS DSP for $299. Here's what to have on the bench first.

PwrBlock 323 STM32 Programmable: Everypin built a 1-32V programmable supply that bolts inside your test jig and takes SCPI commands over USB. No more hand power-cycling boards at 2AM.

29 Open-Source STM32F405 FOC: Sirojudin Munir's SF-Motion FOC driver runs BLDC motors on an STM32F405, costs about $28.58 in parts, and ships KiCad files under the MIT license.

MIT-Licensed STM32C5 BluePill Clone: A 144MHz Cortex-M33 in BluePill form, MIT-licensed with KiCad files published, and it speaks Oberon-2 as fluently as it speaks C.

Aliensense NXS Sends mikroBUS: Aliensense's NXS hub pushes power, video, and sensor data over a single cable up to 40m, linking mikroBUS Clicks and MIPI cameras to your robot.

Project Overview STM32H723ZGT6 + STM32duino: In this guide, you will set up an...

DIY STM32L4 Smartwatch Puts: A maker built an open-source STM32L4 smartwatch with a six-axis IMU, BLE, and USB-C mass storage, then released every line of firmware to fork.

Project Overview CP2102 USB-to-TTL: Use a CP2102 USB-to-UART converter to flash an...

ARDEP is an open-source STM32 dev board packing dual CAN-FD, LIN, and 48V protection onto one PCB, so joining a car's network gets a lot simpler.

Project Overview Programming the STM32 Black Pill with Arduino IDE: In this guide, you...